|
Gizmo | Terasip | CS_CONNECTED Premature & No Disconnect Detect From Called Party |
Post Reply |
|
|
25.09.2010 04:06 |
jain.rajat81@online.gmail.com |
Hi,
I am considering the use of -
Gizmo (other SIP Providers) --> TeraSip --> ITAPI (Julmar)--> .Net Code to write an automated calling application.
Would appreciate any feedback/input and alternates for this approach?
Further when I got the TeraSip sipPhoneSample to work (with Gizmo), I am seeing the following problems -
1. CS_CONNECTED received even before the ringing starts.
2. When the phone is cut by the called party, there is no CS_DISCONNECTED receivedl
Even when I compiled the sample for the ITAPI (Julmar) applications, I am seeing the same behavior.
Any clues why this would be happening?
--------------------------
Rajat Jain
jain.rajat81@gmail.com
--------------------------
|
 |
|
|
Re: Gizmo | Terasip | CS_CONNECTED Premature & No Disconnect Detect From Called Party |
Post Reply |
|
|
25.09.2010 07:12 |
TERASENS Support |
Hi,
> Gizmo (other SIP Providers) --> TeraSip --> ITAPI (Julmar)--> .Net Code to
> write an automated calling application.
> Would appreciate any feedback/input and alternates for this approach?
This should work fine..
> 1. CS_CONNECTED received even before the ringing starts.
> 2. When the phone is cut by the called party, there is no CS_DISCONNECTED
> receivedl
to see what's happening it would be good to have a network trace (eg created
with WireShark).
Best regards,
Matthias Moetje
-------------------------------------
TERASENS GmbH
Stollbergstraße 12a
80539 Munich, GERMANY
-------------------------------------
e-mail: support at terasens dot com
www: www.terasens.com
-------------------------------------
wrote in message
news:49b740ec-dbcc-405e-9bc6-37969c009529@news.terasens.de...
> Hi,
>
> I am considering the use of -
> Gizmo (other SIP Providers) --> TeraSip --> ITAPI (Julmar)--> .Net Code to
> write an automated calling application.
> Would appreciate any feedback/input and alternates for this approach?
>
> Further when I got the TeraSip sipPhoneSample to work (with Gizmo), I am
> seeing the following problems -
> 1. CS_CONNECTED received even before the ringing starts.
> 2. When the phone is cut by the called party, there is no CS_DISCONNECTED
> receivedl
>
> Even when I compiled the sample for the ITAPI (Julmar) applications, I am
> seeing the same behavior.
> Any clues why this would be happening?
>
> --------------------------
> Rajat Jain
> jain.rajat81@gmail.com
> --------------------------
>
|
|
|
|